Index – Reznor RBL (Cabinet Blower) Unit Installation Manual User Manual
Page 12
Form I-RBL, P/N163219R2, Page 12
INDEX
www.ReznorHVAC.com: 1-800-695-1901
©2014 Reznor, LLC. All rights reserved.
Trademark Note: Reznor
®
is registered in at least the United States.
0514 Form I-RBL (Version A.1)
I
nstaller:
Name
________________________________________________________
Company ________________________________________________________
Address
________________________________________________________
________________________________________________________
________________________________________________________
Phone
_________________________________
Distributor (company from which the unit was purchased):
Company ________________________________________________________
Contact
________________________________________________________
Address
________________________________________________________
________________________________________________________
________________________________________________________
Phone
_________________________________
Model ___________ Serial No.___________________________Date of Installation ____________
SPECIFIC INSTALLATION NOTES: (i.e. Location, Amps, Voltage, Adjustments, Warranty, etc.)
____________________________________________________________________________________
____________________________________________________________________________________
BUILDING OWNER OR MAINTENANCE PERSONNEL:
For service or repair
•
Contact the installer listed above.
•
If you need additional assistance, contact the Reznor Distributor listed above.
•
For more information, contact your Reznor Representative by calling 800-695-1901.
Reznor, LLC
150 McKinley Avenue
Mercer, PA 16137
INSTALLATION
RECORD - to be
completed by the
installer:
A
Adjusting Blower Speed 9
B
Belts 9
Belt Tension 9
Blower Bearings 10
Blower Pulley 10
Blower Rotation 10
Blowers 9
C
CAUTION 1
Contact 12
Control Locations 6
D
Damper Linkage 7
DANGER 1
Dimensions 2
Dimensions of Optional Outside
Air Hood 6
Duct Opening Dimensions 2
Roof Curb Dimensions 4
Disconnect Switch 11
Distributor 12
Drives 9
Duct Connections 8
E
Electrical Connections 11
Electrical Supply and
Connections 10
Evaporative Cooling Module
(Optional) 8
F
Filter Arrangements 5
Filter Rack 4
Filters 4
G
General 1
H
Hazard labels 1
100% Outside Air Hood, Option
AS2 5
Outside Air Hood 5
Screened Air Hood for 30%
Outside Air Opening 6
I
INSTALLATION RECORD 12
Installer 12
M
Model 12
Motors 10
Mounting Outdoor Cabinet 2
O
30% Outside Air Hood (Optional)
6
Outside Air Hood (Optional) 5
P
Pressure Null Switch 7
R
Roof Curb 3, 4
S
Serial No. 12
Start-Up 11
Field Supplied Supports (without
a roof curb) 3
Suspending Indoor Cabinet 2
U
Uncrating 2
W
WARNING 1
Warranty 2
Wiring Size 11