Red rocket-x installation instructions – RED ROCKET-X User Manual
Page 35
RED ROCKET-X INSTALLATION INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC
955-0033, REV-B
|
35
The upgrade process begins, and may take several minutes. A progress bar displays in the terminal window.
After the firmware is upgraded, you will be prompted to fully shut down the computer and power back up
again.
9. Close the terminal/command window.
10. Shut down the computer. DO NOT simply restart the computer.
11. Wait a minimum of 60 seconds.
12. Start the computer.
13. To verify that the system recognizes the RED ROCKET-X, go to