Install in a pc, Required tool, Power supply – RED ROCKET-X User Manual

Page 19: Attach the pc extender to the red rocket-x, Red rocket-x installation instructions

RED ROCKET-X INSTALLATION INSTRUCTIONS

955-0033, REV-B

REQUIRED TOOL

Phillips #1 screwdriver

POWER SUPPLY

Before installing the RED ROCKET-X, ensure that you have the appropriate power connector or power cable

adaptor to plug into the RED ROCKET-X 6-pin power connector. The 6-pin PCIe power cable that is included

with the RED ROCKET-X is for Mac Pro installations only, and is not compatible with a PC system.

ATTACH THE PC EXTENDER TO THE RED ROCKET-X

If your PC system has a PCIe card holder, attach the PC extender (included) to the RED ROCKET-X. When you

install the RED ROCKET-X in the PC system, the PC extender will slide into the PCIe card holder, securing the

RED ROCKET-X.
1. Use a Phillips #1 screwdriver to install the two (2) M3x0.7 x 6 mm pan head screws (included) that attach

the PC extender (included) to the end of the RED ROCKET-X.

‒ The PC extender should be flush with the front of the RED ROCKET-X.

‒ The wider end of the PC extender should be at the top of the RED ROCKET-X.

Attach PC Extender

INSTALL IN A PC