PRG Best Boy Wash User Manual - Manual (Page 77)

BEST BOY ® WASH LUMINAIRE USER MANUAL 69
Replacing a Gobo
Parts:
Standard or Custom Gobo(s), as required. (Refer to "Gobo Wheel Configuration" on page 8.)
Tools:
#2 Phillips screwdriver
Hook & Pick tool
Cotton gloves or finger cots
WARNING: Remove power from luminaire before performing any maintenance procedures.
To replace a gobo:
Step 1. Remove power from luminaire.
Step 2. Rotate Head Assembly so that text on backcap is readable (Figure 4-11).
Step 3. Remove Top Head Cover. (Refer to "Removing Head Covers" on page 62.)
Step 4. Remove Wheel Stack as follows:
a. Disconnect one cable.
b. At Wheel Stack, loosen captive screws (Figure 4-11).
c. Gently push lenses out of the way so they will not interfere with removal of the Wheel Stack Assembly.
d. Grasp Wheel Stack Assembly on either side and lift straight up and out of luminaire head.
Figure 4-11: Removing Wheel Stack
Wheel Stack
Captive Screw (4)
Backcap
Text will be readable
in this orientation