PRG Best Boy Wash User Manual User Manual

Page 26

BEST BOY

WASH LUMINAIRE USER MANUAL

Step

3. Roll case to mounting location as required (Figure 2-8).

Step

4. Using two people, carefully lift luminaire into mounting position so that

display is facing to the side

Step

5. Using a third person, secure in place by tightening Truss Hook wing bolts. Ensure that luminaire is fully

supported.

Step

6. Feed safety cable through upper enclosure bracket and secure around pipe.

Step

7. Connect power and data cables according to

"Connecting Power and Data"

on page 20.

Figure 2-8: Vertical "Yoke Out" Hanging Configuration

Remove Luminaire From Case

Attach to Vertical Truss

Using a third person, secure in place
by tightening Truss Hook wing bolts.

Using two people, carefully lift luminaire
into mounting position as shown.

Wing Bolt (2)

Vertical
Truss