PRG Best Boy Wash User Manual - Manual (Page 41)

BEST BOY ® WASH LUMINAIRE USER MANUAL 33
Lamp Screen
+ Start/Douse - displays current lamp status and power setting.
Press START/DOUSE to bring up Yes/No options (depending on
current lamp state).
+ Power On - sets option to strike lamp automatically upon power
up. Press to bring up Wait/Start options.
+ Lamp Hours- displays total lamp hours. Lamp hours are shown in
green if under threshold, yellow at 650 hours, and red at 750 hours.
It is mandatory that the lamp be changed before 750 hours. Press
to bring up Reset Lamp Hours Yes/No options. Press Yes to reset
lamp hours.
+ Strikes - displays number of times the lamp has been struck. Press to bring up Reset Lamp Hours Yes/No
options.
+ Lamp Power - displays lamp power status as a percentage.
+ Maximum Power - sets maximum lamp wattage. Press to bring up Max Lamp Power options.
+ Temp - displays temperatures in Celsius and Fahrenheit. The temperature is shown in white if under limit, yellow
at 87°C, and red at 95°C. At 100°C the lamp will douse.
+ Fans - displays fan status as OK if fan is running, or ERR (red) if fan is not running.
Press (X) to return to Home Screen .
Configuration Screen
+ DMX Address - displays current DMX512 address. Press to bring
up numeric keypad for inputing the address.
+ Display - configures display direction of the Menu Touchscreen.
Press to bring up Auto/Up/Down options.
+ Universe - displays current universe. Press to bring up alpha
keypad or numeric keypad (based on universe format selection).
+ Universe Format - displays alpha/numeric universe format. Press to
bring up Alpha/Numeric options.
+ Edge Setting - displays the current near/far edge setting. (Near =
Near Focal Plane, Far = Far Focal Plane.) Press to bring up Near or
Far options.
+ Pan/Tilt - displays summary of pan/tilt settings:
swap = pan/tilt is swapped.
invert = pan or tilt is inverted.
free = "free" control is enabled (for operating fixture as a follow spot).
Press to bring up
Pan/Tilt Screen .
+ Reset Defaults - resets all configuration settings and address to default values. Press to bring up "Reset All
Defaults" Yes/No options. Default settings are as follows:
Press (X) to return to Home Screen .
- Address: 001
- Universe: A
- Universe Setting: alpha
- Comm Fade Out: no fade
- Lamp Power Up: wait
- Max Lamp Power: 1620
- P/T: standard
(not inverted, swapped, or free)
- Display: auto
- Edge: near
Lamp Screen
Config Screen