Standard hang – PRG Best Boy Wash User Manual User Manual
Page 23

BEST BOY
®
WASH LUMINAIRE USER MANUAL
15
Standard Hang
WARNING:
The luminaire is heavy. Use caution when lifting.
WARNING:
One safety cable and at least two truss hooks should be used in all hang configurations.
To install in standard 2-point hang:
Step
1. Unpack case and attach Hanging Brackets. Refer to
"Unpacking and Attaching Hanging Brackets"
on
page 13.
Step
2. Roll case to mounting location as required (Figure 2-5).
Step
3. Using two people, carefully lift luminaire into mounting position on truss pipe.
Figure 2-5: Removing Luminaire From Case
Truss Pipe