Cleaning intake filters – PRG Best Boy Wash User Manual User Manual

Page 71

BEST BOY

WASH LUMINAIRE USER MANUAL

Cleaning Intake Filters

The filters should be cleaned or replaced when they become dirty. The frequency will depend on how often and in
what conditions the luminaire is used.

Parts:

10.9815.0661

2 EA

HEAD, AIR FILTER, FOAM

55.9815.0052.0

2 EA

O-RING, FOAM FILTER RETAINING (as needed)

Tools:

#2 Phillips screwdriver
Compressed air

and/or

water

To clean or replace filters:

WARNING:

Remove power from luminaire before performing any maintenance procedures.

Step

1. Remove power from luminaire.

Step

2. Remove Head Covers. (Refer to

"Removing Head Covers"

on page 62.)

Step

3. At each Foam Filter, remove retaining o-ring and remove filter (Figure 4-6).

Step

4. Clean filters with compressed air and/or by washing with water. Replace as necessary.

Step

5. Re-install components.

Figure 4-6: Removing Air Filters

NOTE:

If the filters do not get clean after multiple
attempts, they should be replaced.

Foam Filter

Retaining

Pull o-ring outward to loosen

Foam Filter

O-Ring