Turning on pronto, Setting the contrast, Getting started – Philips TSU3000 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
User Guide
Getting Started
Turning on Pronto
Pronto can be turned on in three different ways:
■ Tap
the touch screen.
Nate
Only use your finger or a blunt soft object like a penal eraser to operate the
touch screen.
Press
one of the hard buttons.
Nate
When you press a hard button on Pronto, the according function will be
executed immediately, while the buttons below the touch screen will activate
the display.
Press the
Backlight
button.
Setting the Contrast
You can set the contrast level and switch on the backlight of Pronto using the hard
buttons on the left side of the device.
■ To
decrease the contrast
, press and hold the upper button and at the same
time press the hard button.
To
increase the contrast
, press and hold the upper button and at the same
time press the "
+
" hard button.
■ To
switch on the backlight,
press the upper button.
Backlight
& contrast
9