Philips TSU3000 - Manual (Page 23)

Customizing Pronto
User Guide
Labeling a Page
ni Press the left hard button i tqq I s ^ below the touch screen for
2 seconds.
The TOOLS menu appears.
Tap Label In the Tools Menu.
The 'Label Tool' screen appears.
0
Tap
C
J in the label Tool' screen.
The Page Overview appears.
[G Tap the Page you want to label.
The 'Labeling' screen appears.
[P Follow the instructions 5 to 8 of "Labeling a button" on page 21.
[e] Press i Done“^, .
The label of the selected Page is changed. The Page Overview appears again.
P You can select another Page in the Page Overview to label.
P Press the left hard button i below the touch screen below the
touch screen to exit Label Tool.
Adding Devices
The Add Tool allows you to add a new device or copy an existing device .
When you add a new device, a device template stored on your Pronto is used to
create the device pages, buttons and functions. Philips IR codes are used when
you add a new device. Then you have to program the new device using the
Brand Tool (page 13) or the Learn Tool (page 19).
Copying an existing device saves time. The personal settings you defined for
that device will also be copied. If you want to add e.g. a second C0 player, you
do not have to learn or create macros again, you just copy them from the existing
CD player already programmed on your Pronto.
Adding a New Device
P Press the left hard button f below the touch screen for
2 seconds.
The TOOLS menu appears.
P Tap Add in the Tools Menu.
The 'Add Tool' screen appears.
P
Tap
C D
in the 'Add Tool' screen.
The 'Adding' screen appears.
23