Maintaining pronto, Take care not to scratch the touch screen, Protect pronto from temperature extremes – Philips TSU3000 User Manual
Page 42: Pronto is not waterproof, Important notices, Cleaning pronto
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Maintaining Pronto
User Guide
Important Notices
Take care not to scratch the touch screen
Use your finger to tap the touch screen or use plastic-tipped pens intended for use
with touch screen.
Never use an actual pen, pencil or other sharp object on the touch screen.
Protect Pronto from temperature extremes
Keep Pronto away from heaters and other heat sources.
Pronto is not waterproof
Pronto should not be exposed to rain or moisture.
Do not store or use Pronto in any location that is extremely damp or wet.
When you have spilled water on your Pronto, you have to take out the batteries
and let Pronto dry for 48 hours before you replace the batteries.
When you have spilled other liquids on your Pronto, you can clean it with distilled
water.
The touch screen o' Pronto contains a gtass element
Do not drop Pronto or subject it to any strong impact.
Cleaning Pronto
■ Use a soft, damp cloth to clean Pronto.
■ If the touch screen of Pronto is spoiled, clean it with a soft cloth moistened
with a diluted window-cleaning solution.
■ Do not use a corrosive detergent or an abrasive sponge.
■ Avoid the use of abundant water.
42