Philips TSU3000 - Manual (Page 28)

Customizing Pronto
User Guide
Setting the Timeout of the LCD Backlight
The timeout of the LCD backlight determines how long the backlight of the touch
screen and the buttons stays active. Shortening the active time will increase
Pronto': battery life. The backlight timeout and the LCD screen timeout can work
independently.
[jj jgp [Backlighttimeout
40
sec j jp Setup Page.
The Backlight Timeout button is selected. The'+' a n d l a b e l s appear on the
two middle hard buttons below the touch screen.
To increase the timeout, press (and hold) the button labeled '+'.
-or­
To decrease the timeout, press (and hold) the button labeled '-'.
^ Tap timeout 40 sec J gggjp
The new LCD backlight timeout is set.
Setting the Switch Level of the Light Sensor
The light sensor on your Pronto causes the backlight to switch on automatically
according to the ambient light of your home theater environment. The light level is
indicated in the bar.
The indicator is the threshold you set, while the gray area indicates the actual
light level, measured by the light sensor. When actual light level reaches the
threshold you set, the backlight on your Pronto will switch on.
0 Tap 3 in the first Setup Page.
The Light Sensor button is selected. The'+' a n d l a b e l s appear on the two
middle hard buttons below the touch screen.
To increase the level, press (and hold) the hard button labeled '+'.
-or­
To decrease the level, press (and hold) the hard button labeled '-'.
0 Tap ( Light sensor ..................... ♦ l] gggjp
The Light Sensor button is deselected again. The new level for the light sensor
is set.
2>