Philips TSU3000 - Manual (Page 10)

Getting Started
Setting Time and Date
When you have installed the batteries and turned on the Pronto, you might want to
set the current time and date. To go to the Setup Pages, tap the Pronto icon in
the top center of the touch screen.
Hh96Ci6C :h" -1 j 6 T4#Ja:
There are two different formats:
■ 12 hour (AM/PM): This is the default format.
■ 24 hour
You can select the Time Format by tapping the Time Format button
in the first Setup Page. The Time Format button toggles between the two
formats.
Hh96ci6C :h" -1
j
6
Note When the batteries are replaced, the time is reset to 0.00 a.m.
User Guide
[T| Tap the Tij" button in the first Setup Page.
The Time button is selected. The labels '+' and appear for the two middle
hard buttons.
[Y| To increase the time, press (and hold) the hard button labeled '+'.
-or­
To decrease the time, press (and hold) the hard button labeled '-'.
[—1 Tap the Tij" button again.
The new time is set.
Hhanging :he Da:e
To change the year
[T Tap the Year button in the first Setup Page.
The Year button is selected. The labels '+' and '-' appear for the two middle
hard buttons.
[I To increase the years, press (and hold) the hard button labeled '+'.
-or­
To decrease the years, press (and hold) the hard button labeled '-'.
[—I Tap the Year button again.
The new year is set.
10