Philips TSU3000 - Manual (Page 20)

Customizing Pronto
User Guide
Position Pronto and the remote control as illustrated above.
Note Make sure that you aim Pronto's learning eye at the remote control's
IP window.
The distance between Pronto and the remote control should be between
L and 8 inches ¡10 and 20 cmj.
[B Press the key on the other remote control within 5 seconds.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
See "Pronto will not learn commands" on page 41 for more information.
[4| Select other buttons on Pronto you want to learn.
[¥] Press the left hard button t below the touch screen to exit
Learn Tool.
Learning a Device Action
rn Press the left hard button ? T oo I s ^ below the touch screen for
2 seconds.
The TOOLS menu appears.
B Tap Learn in the Tools Menu.
The 'Learn Tool' screen appears.
I g I 1'gp Learn device action
The Device Overview appears.
[G| Tap the Device for which you want to learn a Device Action.
A Learning indication appears in the top center of the touch screen.
B Position Pronto and the remote control as illustrated above.
Note Make sure that you aim Pronto's learning eye at the remote control's
IP window.
The distance between Pronto and the remote control should be between
L and 8 inches ¡10 and 20 cmj.
B Press the key on the other remote control.
If learning succeeded, you will get an OK message.
If learning failed, you will get a Failure message.
B Select other Devices on the Device Overview you want to learn.
B
Press the left hard button [ below the touch screen to exit
Learn Tool.
20