Oakworks Spine Positioning System - Manual (Page 8)

6
des
C
rip
Tion
of
C
omponen
Ts
description of components - continued
0546-06 contoured torso support pad
The Contoured Torso Support is constructed of dense foam in the center,
flanked by softer foam and covered in a fabric designed to withstand today’s
disinfectants. The softer foam accommodates to the patient’s shoulders and/or
breasts to maximize comfort. This helps provide enhanced patient stability while
allowing for the shoulders to decend for optimal cervical and thoracic imaging.
The distal end of the torso support pad is hollowed out under the abdomen to
enhance patient comfort and stability. Additionally, the distal end of the torso
support pad is wider to enhance patient stability by reducing sway while in the device.
0550-06 small contoured torso Wedge
0554-06 large contoured torso Wedge
The Contoured Torso Wedge is constructed of dense foam and covered in a fabric
designed to withstand today’s disinfectants. This provides enhanced patient stability
and conveniently reduces shoulder interference during cervical procedures. For faster
set up, the larger torso wedge can replace the combination of the smaller wedge and
rectangular adjuster pads as shown here.
em2410-sp - crescent face rest pad
The Crescent Face Rest Pad supports the patient’s face in a prone position with-
out compromising air space for breathing. The face pad can be moved caudad
in situations to prevent imaging of the locking mechanism
when performing upper cervical procedures
that require substantial imaging angulation.
Large wedge
Small wedge