Oakworks Prone Pillow - Manual

The Prone Pillow is designed to comfortably support your clients during
a variety of procedures and offers excellent air flow for long prone
procedures. The Prone Pillow can be used on any horizontal surface.
The unit is composed of a easily cleaned, durable polymer platform
and a proprietary pad system made up of 2 removable, positionable
pads: the Head Rest Cushion and the Support Pad(see Fig.1). These
pads are positioned on the platform through the use of Velcro ®
attachment strips that hold the pads securely in the perfect position
for both comfort and procedural need, regardless of client size.
• Prone Positioning
The Head Rest Cushion can be positioned anywhere along the
length of the large vent to accommodate clients of different heights
(see Fig 2). The width of the pad can be adjusted before placing the
cushion on the platform to fit different size faces (see Fig 2a). Adjust
the Head Rest Cushion placement for comfortable support by positioning
it along the Velcro ® strips so that the head/face and shoulders are
equally supported (see Fig 2b).
Phone: 717.235.6807 FAX: 717.235.6798 www.oakworks.com
923 East Wellspring Rd. New Freedom, PA 17349
Instructions for Using Oakworks Prone Pillow
Fig. 1
Platform
Support Pad
Head Rest
Cushion
Fig. 2a Fig. 2b
Head Rest Cushion in Narrow Position
* Patent # US D555,251 S
Fig. 2
Short
Position
O
akwOrks ®
Prone Pillow
For imaging applications - generator must be below
the patent and the receiver above the patient.
warning
Breathing
Vent
Tall
Position