beautypg.com

Oakworks Accessory Storage User Manual

Accessory storage instructions, For all wooden & metal portable tables

background image

Wooden Models without an arm rest shelf (Fig. 1)
Applicable for tables with two standard end panels
and for tables with one access end panel
• Separate the Face Crescent Pad from the Face Rest. Insert the

Face Rest Platform half way thru the elastic strip attached to the

plywood top of the table (as shown in Fig. 1).
• Place the Face Rest Crescent on the Hook and Loop fasteners closest

to the hinge side of the table.

Metal Models (except Advanta) (Fig. 4)
• Separate the Face Crescent Pad from the Face Rest. Insert

the legs of the Face Rest Platform thru the elastic strip attached

to the plywood top of the table. Fold the Platform back on itself

and secure the cam locks. (as shown in Fig. 4).
• Place the Face Crescent pad on the Hook and Loop

fasteners closest to the hinge side of the table (as shown in Fig. 4).

Advanta (Fig. 5)
• Separate the Face Crescent Pad from the Face Rest. Insert

the legs of the Face Rest Platform thru the elastic strip attached

to the plywood top of the table. Fold the Platform back on itself

and secure the cam locks. (as shown in Fig. 5).
• The face rest crescent will not fit in the Advanta for storage.

We suggest using the pocket on your carry case for storage.

Fig. 1

Accessory Storage Instructions

For all Wooden & Metal Portable Tables

Phone: 717.235.6807

FAX: 717-235-6798

www.oakworks.com

Wooden Models with an arm rest shelf (Fig. 2 & 3)
Applicable for tables with two standard end panels
and for tables with one access end panel
• Separate the Face Crescent Pad from the Face

Rest. Insert the Face Rest Platform half way thru

the elastic strip attached to the plywood top of the

table (as shown in Fig. 2).
• Place the Face Rest Crescent on the Hook and Loop

fasteners closest to the hinge side of the table

(as shown in Fig. 3).

Fig. 2

Fig. 3

Fig. 4

Fig. 5

PN 6482 rev. 0807