Symbol identification, 4symbol iden tifi c a tion – Oakworks Spine Positioning System User Manual
Page 6
4
symbol
iden
Tifi
C
a
Tion
symbol identification
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, indicates the
potential of exposure to harmful x-rays. Be sure to read and comply with all
warnings.
This symbol, when used in this manual and on product labels, indicates that the
table and components are a Type B Applied Part pursuant to IEC 601.1 and EN
60601-1: 1990.
This symbol when used in this manual or on product labels, warns that when
stacking containers during transport and storage, there should be do not stack
more than 5 containers high.
This symbol, when used in this manual or on product labels, indicates that the
product should be protected from moisture. The humidity specifications for
Transport & Storage are listed on page 23.
This symbol, when used in this manual or on product labels, indicates that
information is given regarding the recommended temperature limits during
transport and storing.
This symbol, when used in this manual or on product labels, indicates
the date of manufacture of the device.
U L 2 6 0 1 - 1
C S A C 2 2 . 2 N O . 6 0 1 . 1
I E C 6 0 6 0 1 - 2 ( 2 0 0 1 - 0 9 )
C
U S
L I S T E D
R
U L 2 6 0 1 - 1
C S A C 2 2 . 2 N O . 6 0 1 . 1
I E C 6 0 6 0 1 - 2 ( 2 0 0 1 - 0 9 )
C
U S
L I S T E D
R
U L 2 6 0 1 - 1
C S A C 2 2 . 2 N O . 6 0 1 . 1
I E C 6 0 6 0 1 - 2 ( 2 0 0 1 - 0 9 )
C
U S
L I S T E D
R
U L 2 6 0 1 - 1
C S A C 2 2 . 2 N O . 6 0 1 . 1
I E C 6 0 6 0 1 - 2 ( 2 0 0 1 - 0 9 )
C
U S
L I S T E D
R
U L 2 6 0 1 - 1
C S A C 2 2 . 2 N O . 6 0 1 . 1
I E C 6 0 6 0 1 - 2 ( 2 0 0 1 - 0 9 )
C
U S
L I S T E D
R