Neuspeed 62.10.71 User Manual
Page 4

NEUSPEED
• 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX
Visit us on the web…http://www.neuspeed.com
17. Re-install belt in correct running direction and
slowly remove M8 bolt from tensioner, making sure
belt is correctly seated in pulley grooves.
18. Re-install engine cover and under-panel. Install
wheel and lug nuts. Torque lug nuts to 110Nm (81
ft.-lb.) for original wheels or to wheel manufacture
specifications.
19. Carefully check complete installation to be sure
all fasteners are tight, the belt is correctly seated in
groves of each pulley and that nothing interferes with
the pulleys or belt.
©Copyright 2002, NEUSPEED
®
. All rights reserved. Reproduction in whole or in part prohibited.
DOC.62.10.71 Rev. 05.30.03
- 95.10.91 (1 page)
- 66.10.91 (1 page)
- 66.10.94 (2 pages)
- 66.10.95 (1 page)
- 15.02.25.3 (2 pages)
- 25.02.19.4 (2 pages)
- 25.02.19.9 (2 pages)
- 25.02.25.3 (2 pages)
- 25.02.25.4 (1 page)
- 25.10.25.8 (2 pages)
- 25.10.27.9 (2 pages)
- 80.10.91 (2 pages)
- 25.02.28.3 (2 pages)
- 45.10.91 (2 pages)
- 15.02.25.4 (2 pages)
- HCB.25.02.25.3 (1 page)
- 32.10.91 (1 page)
- 65.10.72 (1 page)
- 49.10.93 (16 pages)
- 49.10.95 (15 pages)
- 58.45.06.028 (1 page)
- 62.02.65 (2 pages)
- 65.02.65 (2 pages)
- 65.10.79 (2 pages)
- 65.10.60 (2 pages)
- 65.10.92 (2 pages)
- 65.10.61 (3 pages)
- 65.10.76 (4 pages)
- 65.10.99 (3 pages)
- 65.10.80 (2 pages)
- 62.10.32 (3 pages)
- 62.10.33 (3 pages)
- 62.10.74 (3 pages)
- 62.10.99 (1 page)
- 62.10.83 (1 page)
- 65.10.95 (4 pages)
- 65.10.83 (2 pages)
- 65.10.85 (2 pages)
- CHIP.20T.17 (2 pages)
- 65.02.67 (3 pages)
- 62.10.92 (2 pages)
- 62.02.68 (2 pages)
- 62.10.90 (2 pages)
- 65.10.84 (2 pages)