Neuspeed 65.10.92 User Manual
Page 2
NEUSPEED®
• 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX •
• Visit us on the web…
http://www.neuspeed.com
12. Install and tighten rubber isolator into
threaded stand-off just in front of
battery.
13. First install NEUSPEED intake pipe into
silicone hose, then attach P-Flo bracket
onto rubber grommet mount and rubber
isolator.
14. Install and tighten acorn nut.
15. Tighten #48 hose clamp.
16. Re-attach MAF electrical connector.
17. Rotate air pump fitting 90-degrees
counter-clockwise.
18. Attach mini filter to billet fitting and
tighten. Then connect to air pump
fitting.
19. Attach black plastic hose support clip
from radiator coolant vent hose to air
pump hose.
20. Attach and tighten NEUSPEED air filter.
21. For extra protection, slide coolant hose
protector sleeve just under P-Flo
bracket.
22. Install rubber strip on top-edge of P-Flo
bracket.
23. Double-check complete installation.
Copyright 2009, NEUSPEED
®
. All rights reserved.
Reproduction in whole or in part prohibited.
DOC.65.10.92 Rev. 01.29.09