Muse Research Receptor V2.0.1 Software Update Manual - Manual (Page 5)

5
Getting Started: Installing the software update
Now its time to install the software you have downloaded but it needs to be done in TWO steps. The
process is simple:
1. Turn on your Receptor, connect to the hard drive using Muse Remote Control.
2. Drag and drop the "Receptor-update" file you downloaded into "Drop Installers Here".
3. Run the installer from the SETUP menu in your Receptor.
4. Once the installer has run, and the system has rebooted, AUTHORIZE the software update (requires
connection to the Internet) before installing all the plugins and presets.
5. Once the update is authorized, drag and drop the "Plug-in Bundle" file you downloaded into the "Drop
Installers Here" folder, and run the installer from the SETUP page. That's all there is to it. .
Step-by Step Installation Instructions
1. First off, we need to open up Receptor's hard drive. Assuming you've established connection between
your computer and the Receptor, we simply press on the HARD DRIVE button that is on the Muse Remote
Control window:
This will open up a window that has the contents of Receptor's hard drive:
2. Locate the folder called "Drop Installers Here" and then drag and drop the "Receptor Update" software
you downloaded into this folder.