Muse Research Receptor V2.0.1 Software Update Manual User Manual
Page 14
14
3. Now let's select a preset for this synth channel. Turn the bottom knob to find the sound you
want. For example, let's choose an Electric Piano patch from the "TAG: Electric Pianos." Press the
knob to load it
3. Now we'll layer that with another sound—say a pad synthesizer. To do this, we press the
CHANNEL + button, and then the bottom encoder switch to add a new channel to what we already
have loaded.
4. Select the TAG and preset of interest, say "Airy Pad" from the "TAG:Synth Pads" category. Press
the knob to load this preset. Now press the "PLAY" button to hear both sounds combined together
What we've done is layered the Electric Piano and the Pad sounds together, which creates an
entirely new sound. You can adjust the volume of either sound by pressing MIX and selecting the
channel of interest to adjust the Electric Piano or Pad volume levels respectively.
NOTE: Whenever you have an individual channel or effect selected in PLAY mode, you will only hear
that channel. To hear the entire system, press the PLAY button to deselect the SYNTH or EFFECT
channel to hear the combined sound.
5. If you want to SAVE this combination of sounds, simply press and hold the EDIT button, and you
can save this preset to the USER TAG. Press the bottom encoder knob to save the preset with a
default name. You can rename it later in the Graphical User Interface if desired.