MF Digital Spectrum 2 Thermal (Rev: 03/05/01) - Manual (Page 73)

Spectrum2 Printer Operator’s Guide
Document Revision: 100102
72
Error Codes for Status LED
The Status LED is located on the front of the printer.
Number of
Flashes
Area to check Action
1 Timeout Power OFF / Power ON printer
2 Ribbon out Install new ribbon, press START
3 No CD No CD in tray. Place CD in Tray, press
START to continue.
4 Tray error Press START to home tray
5 Head motor error Power OFF / Power ON printer
6 Memory error Memory error detected.
Power OFF / Power ON printer
7 Print buffer overflow Press START key
(check label size - use RLL setting in driver to
reduce label)
8 Positioning Power OFF / Power ON printer
9 Data error Check driver color setting matches type of
ribbon installed in printer.
Power OFF / Power ON printer