MF Digital OptiEC User Manual

MF Digital Printers

SCRIBE EC

Installation Guide

Document Revision: 11/4/04

Minimum System Requirements for Scribe EC With Opti Ec

Print Station & 1-Drive Models – Minimum System Requirements:

• Minimum Pentium® III or compatible personal computer @ 800 MHz or faster

• Windows 2000 Professional (Service Pack 4 or higher) or Windows XP Pro Service Pack 1.0a or higher

• 512 MB RAM

• 7200 RPM ATA-100 hard drive with 850 MB for CD-R or 5GB (NTFS) for DVD-R

of free hard disk space - fully defragmented

• Monitor: 800 x 600 display, 16-bit color recommended
• Two button mouse

• High quality recordable CD-Rs / DVD-Rs

• One free PCI slot for 1 Drive System, Not required for Print Station Only.
• One external COM Port (COM1 or COM2) *Two external COM ports are needed if

using MF DIGITAL Spectrum2 or Prism Plus (COM1 and COM2).

• WinASPI driver layer (Included)

• IEEE-1394 B Adapter (Included)

•

Appropriate IEEE-1284 printer cable if attached

•

* A USB to Serial Converter can be used if no COM port is available.

2-Drive & 4-Drive Models – Minimum System Requirements:

• Minimum Pentium® 4 or compatible personal computer @ 2 GHz or faster

• Windows 2000 Professional (Service Pack 4 or higher) or Windows XP Pro Service Pack 1.0a or higher

• 1 GB RAM (Asynchronous Operation)