MF Digital PicoJet 6000 CD/DVD - Manual (Page 7)

CD-3706/P Operator’s Guide Document Revision: 030501.1 PicoJet PJ-6000 Operator’s Guide
Document Revision:020113.1
Page 6
Safety Precautions
The system is shipped with a three-prong power connector, and must be used with
a properly grounded AC receptacle. DO NOT try to defeat the third “ground”
prong. All computer peripherals must be properly grounded, and this printer is no
exception. The use of a power conditioner, such as an Uninterruptible Power
Supply (UPS) or a surge protector, is always a good idea.
Repairs or alterations should only be attempted by an authorized, factory-trained
technician. MF Digital reserves the right to void the warranty if unauthorized
service is performed.
Connecting your PicoJet to your MF Digital Copier
If you will be connecting your PicoJet to your MF Digital copier, refer to the quick connect
guide that accompanied your copier, or the appropriate section to follow.
If you are unsure as to which unit you have, Scribe SA units have LCD display and numeric
keypad while the Scribe PC Series does not.
MF Digital Scribe PC (DPx-9102 & 9104)