Page 9, Buttons & leds – MF Digital PicoJet 6000 CD/DVD User Manual
Page 10

CD-3706/P
Operator’s Guide
Document Revision: 030501.1
PicoJet
PJ-6000 Operator’s Guide
Document Revision:020113.1
Page 9
Buttons & LEDs
1
Cartridge Status LED
This LED will flash to indicate when the cartridges are low. It will
also flash to alert you to improper cartridge installation, or if the
cover is open or ajar.
2
Print Cancel
Pressing this button will cancel the current print.
3
Tray Open / Close
Press to open or close the disc tray.
4
Resume Print / LED
The LED serves to indicate attention is needed. Such as inserting a
new disc, or clearing an error.
When operating as a stand-alone printer, and multiple copies are
being printed, this LED will flash until the disc is removed, a new
one is put in the tray, and the resume button is pressed. The printer
will print the next disc.
5
Power On /Off
This button turns the printer on and off. The power LED flashes
when the printer is processing
Caution!
Always use the Power button to turn the printer on and off.
Using a power strip, surge protector, or a wall-mounted switch to
turn the printer on and off may cause printer failure.