MF Digital PicoJet 6000 CD/DVD - Manual (Page 6)

CD-3706/P Operator’s Guide Document Revision: 030501.1 PicoJet PJ-6000 Operator’s Guide
Document Revision:020113.1
Page 5
Getting Started
Carefully remove the printer from the shipping container. Inspect the contents, and verify them
against the packing slip. Report any errors in shipping as soon as possible.
What’s In The Box
Your new printer includes:
• PicoJet 6000 Printer
• 1 Black Cartridge
• 1 Color Cartridge
• Power cord
• Software CD
• Manual CD
• USB Cable
What you will also need
You will also need some inkjet printable CDs or DVDs. A variety of surfaces are
available including non-printable surfaces, or those intended for felt tip markers,
thermal, as well as ink jet. Only ink jet surfaces are suitable for use with the
PicoJet CD/DVD Printer.
Note: Using discs without an ink jet printable surface will result in discs
where the ink does not dry or adhere properly. Never use discs with
labels on them. Labels can delaminate and jam in your printer.
Packing Materials
Please retain the original box and packaging in the event that the unit requires
future servicing. This will help to reduce the possibility of damage occurring in
transit.
The Best Place To Put Your Printer
The best operating location for your printer is in a climate-controlled area, free of
dirt, dust, humidity, excessive heat, and electronic or electromagnetic
interference. Room temperature should be between 65 and 75 degrees Fahrenheit,
or between 18 and 23 degrees Celsius. If not integrating this printer with a MF
Digital copier or publisher, place the printer on a solid, steady work next to the
host PC, and allow sufficient room for all incidental work materials.