Configuration and status register 1, Dial tone / wait for dial tone time, Dial tone / qualify dial tone time – Maxim Integrated Teridian V.22 bis Linux Softmodem for 73M1822/73M1922 MicroDAA User Manual
Page 30: Dial tone / cadence a minimum on time, Dial tone / cadence a maximum on time

V.22 bis Linux Softmodem for 73M1x22 MicroDAA User Guide
UG_1x22_043
30
Rev. 1.5
S73
Configuration and Status Register 1
32
Sets different configuration. A bit set to 1 selects the function.
Bit 0
Enable teletel SEP codes in V.23 PAVI mode
Bit 1
Low power standby idle mode enabled
Bit 2
Reserved
Bit 3
Reserved
Bit 4
Reserved
Bit 5
CLI 125 mS AT command delay enabled (disable this option for faster response
time to AT commands).
Bit 6
Adaptive dialing enabled
Bit 7
Reserved
S66
Dial Tone / Wait For Dial Tone Time
n
1 – 254 in second
8
8 seconds
Sets the maximum number of seconds the modem waits for dial tone.
S67
Dial Tone / Qualify Dial Tone Time
n
0 – 254 in 10 ms unit
120
1.2 second
Sets the minimum duration for dial tone.
S35
Dial Tone / Cadence A Minimum On Time
n
0 – 255 in 40 ms unit
0
0 ms
S36
Dial Tone / Cadence A Maximum On Time
n
0 – 255 in 40 ms unit
Country selection
dependent (S99)
Country selection
dependent (S99)
Country selection
dependent (S99)