Maxim Integrated Teridian V.22 bis Linux Softmodem for 73M1822/73M1922 MicroDAA - Manual (Page 22)

V.22 bis Linux Softmodem for 73M1x22 MicroDAA User Guide UG_1x22_043
22 Rev. 1.5
S4 Line Feed Character
n 0 –127 (ASCII)

10
0 Suppress after the in a result code
Applicable only when verbose mode (V1) is selected.
S5 Backspace Character
n 0 –32 and 127 (ASCII)
 8
S6 Wait Before Blind Dial
n 1 – 255 seconds
 2 2 seconds
When X0, X1 or X5 mode is selected, the modem will dial after the time set in S6 has
elapsed since going off hook.
S7 Wait For Carrier After Dial
n 0 – 254 seconds
 50 50 seconds
The S7 register performs two functions. It sets the maximum time between dialing and
responding to an incoming carrier signal. It also sets the duration of the pause generated
by the W dial string modifier.
Country selection
dependent (S99)