Maxim Integrated EE-Sim - Manual (Page 30)

page
30
EE-Sim User Guide
4.4 Sequencing
4.4.1 Adding a Sequencer
Typically, your design should include at least one sequencer to manage the
flow of power to the rails in the prescribed order.
1. Open a system power design and click the Sequencing tab.
2. Click the Add Sequencer button.
3. In the Find a Solution window:
a. Click Show Filters (it may already be displayed).
b. In the Input Channels section, enter values for the minimum (Min)
and maximum (Max) number of input channels.
c. In the Voltage Input section, enter a value for the Max voltage.
d. In the Interface, Option, and Features sections, check the filter
criteria that you want to apply to narrow the search results for your
sequencer.
e. In the Choose Sequencer section, scroll or navigate to the pages
that show matching parts. You can also click a column heading to
sort or enter a search phrase to find specific matching sequencers.
4. Select a sequencer in the list and then click Select Part.
5. On the Sequencing page in the Sequencer Selection section:
a. Verify your sequencer appears and the number of input channels
is acceptable.
b. To change parts, click Edit.
c. To delete this sequencer, click Delete.
d. To add another sequencer, click Add Sequencer and repeat the
steps in this procedure.
e. To indicate that you want EE-Sim to produce a timing diagram to
help you verify the timings, check the box for Check for Timing
View.
6. Click Save.