Maxim Integrated EE-Sim - Manual (Page 18)

page
18
EE-Sim User Guide
3.5 Modifying Schematics
3.5.1 Modifying Product Components
You can change component settings, parts, and even switch manufacturers.
You can choose stock or custom settings in a design.
1. Open a design and click the Schematic tab.
2. Click a component to open and edit it. In the example shown below, the
C16 capacitor is opened in the schematic diagram.
3. In the Edit window:
a. Expand Use Vendor Part to view the currently selected
component. To switch components, click Search for a
Different Part. Continue with the remaining steps in this
procedure.
b. (Optional) Expand Use Custom Part to enter your own setting. For
example, you can change the Capacitance from 33 nF to 31 nF.
Click OK and exit this procedure.
4. Apply one or more filters to search for the required manufacturers,
attributes, and products. To learn more, see the example on the next
page.
5. In the search results:
a. Click a product by its Manufacturer Part Number to learn more
about it.
b. Click the Select icon to swap the old part for the new one.
6. Click OK to close the Edit window.