KERN & SOHN SFB 300K-1LM - Manual (Page 49)

SFB-BA-e-1324 49
9.4 Error messages
Error
message
Description Possible causes
- - - - -
Maximum load exceeded
Unload weighing system or reduce
preload.
- - ol - -
Err 1 Incorrect data input Follow format “yy:mm:dd“
Err 2 Incorrect time entry Follow format “hh:mm:ss“
Err 4 Zeroing range exceeded due
to switching-on balance or
pressing (normally 4%
max)
Object on the weighing plate
Overload when zeroing
Err 5 Keyboard error
Err 6 Value outside the A/D
changer range Weighing plate not installed
Damaged weighing cell
Damaged electronics
Err 9 Stability display does not
appear Check the environmental
conditions.
Err 10 Communication error No data
Err 15 Gravitation error Range 0.9 ~ 1.0
Err 17 Taring range exceeded Reduce load
Fai l h /
Fai l l
Adjustment error Repeat adjustment.
Err P Printer error Check communication parameters
Ba lo /
Lo ba
Battery very low Recharge battery
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.