KERN & SOHN SFB 300K-1LM - Manual (Page 46)

SFB-BA-e-1324 46
P2 mode
Konfigurations-
daten
SiGr Single-range balance
COUNT Display internal resolution
DECI Position of the decimal dot
Div. Readability [d] / verification value[s]
CAP Balance capacity [Max]
CAL
noLin Adjustment, see chap. 6.5
LinEr Linearisation, see chap. 6.7
GrA Not documented
dUAL 1 Dual range balance
Balance with two weighing ranges and different maximum load
and weighing ranges and interval sizes but only one load-
supporting pan, whereby each range extends from zero to the
respective maximum capacity. When load is removed, weighing
scales will remain in 2nd range.
COUNT Display internal resolution
DECI Position of the decimal dot
div.
div 1
Readability [d] / verification value [e]
1. weighing range
div 2
Readability [d] / verification value [e]
2. weighing range
CAP
CAP 1
Weighing scale capacity [max]
1. Weighing range
CAP 2
Weighing scale capacity [max]
2. Weighing range
CAL
noLin Adjustment, see chap. 6.5.1
LinEr For linearization, see chap. 6.6.1
GrA Not documented
dUAL 2 Multi-interval balance
Weighing scales with one weighing range subdivided into partial
weighing ranges, each providing a different scale interval. The
scale interval depends on the applied load and is automatically
changed during loading and unloading.
COUNT Display internal resolution
DECI Position of the decimal dot
div.
div 1
Readability [d] / verification value [e]
1. weighing range
div 2
Readability [d] / verification value [e]
2. weighing range
CAP
CAP 1
Weighing scale capacity [max]
1. Weighing range
CAP 2
Weighing scale capacity [max]
2. Weighing range
CAL
noLin Adjustment, see chap. 6.5.1
LinEr Linearisation, see chap. 6.6.1
GrA Not documented
P3 OTH
s. Kap. 7.11 / 7.12
LOCK
on Keyboard lock enabled
off Keyboard lock disabled
ANM
on Animal weighing enabled
off Animal weighing disabled