KERN & SOHN SFB 300K-1LM - Manual (Page 33)

SFB-BA-e-1324 33
7.7.2 Tolerance check for target quantity
Settings
 Press
and at the same time in weighing mode.

 Press until the display for entering the lower limit value
appears.
 Press , the current setting will be displayed.
 To enter the lower limit, e. g. 75 items, press the navigation
buttons (see chap. 2.1.1); the currently enabled digit will be
flashing.
 Confirm input by
.
 Press
repeatedly until is displayed.
 Press , the current setting for the upper limit will be
displayed.
 To enter the upper limit, e. g. 100 items, press the
navigation buttons (see chap. 2.1.1); the currently enabled
digit will be flashing.
 Confirm input by .
 Press repeatedly until is displayed.

Press and the current setting for the acoustic signal will
be shown.
 Select desired setting (no, ok, ng) by .
 Confirm input by
.