Keri Systems V-Track - Manual (Page 20)

V-Track™ Automatic Long Range Vehicle ID System
Installation Guide
Page 20 of 20 P/N: 01538-001 Rev. G
8.3 Points to Remember
The “Range” control on the receiver has absolutely no impact on the antenna power or its coverage area. This is a receiver
sensitivity control that allows the receive range to be reduced to eliminate unwanted signals from other V-Track systems
in the same general area. It only affects the usable distance between the vehicle tag and the receiver. It is recommended to
set it at maximum if there are no other systems in the vicinity.
If it is necessary to mount the receiver in a housing, we recommend using a non-metallic box. Radio frequencies (RF) will
not travel through metal. If it is necessary to use a metal housing, then an external antenna must be attached to the
receiver.
9.0 Contact Keri Systems
end of document
Keri USA Keri UK, Ireland, Europe
2305 Bering Drive
San Jose, CA 95131
Unit 17
Park Farm Industrial Estate
Ermine Street
Buntingford
Herts SG9 9AZ UK
Telephone: (800) 260-5265
(408) 435-8400
Telephone: + + 44 (0) 1763 273 243
Fax: (408) 577-1792 Fax:+ 44 (0) 1763 274 106
Web: www.kerisys.com Web:www.kerisystems.co.uk
E-mail: [email protected]
[email protected]
E-mail:[email protected]
[email protected]