Keri Systems V-Track - Manual (Page 10)

V-Track™ Automatic Long Range Vehicle ID System
Installation Guide
Page 10 of 20 P/N: 01538-001 Rev. G
5.0 LRT Vehicle Installation
Figure 8 shows the optimal placement of the Transponder in order of signal response performance. Install the Transponder
using the provided double-sided tape or Velcro™ (see Figure 9 on page 10). Ensure the label-end of the Transponder is
mounted away from the rear-view mirror’s mounting post. Prior to installation, make certain the desired location complies
with all state and local vehicle code laws. Optimal placement of the Transponder is behind the rear-view mirror, out of the
driver's vision (Location 1, below).
Figure 8: Optimal Transponder Installation Locations
Figure 9: Transponder Mounting Tape
1
2
3
double-stick tape for windshield mounting
(remove and replace with Velcro TM strips if desired)
label recess
mount this end of Transponder
away from
rear-view mirror mounting post
rear-view
mirror
mounting post