Keri Systems V-Track - Manual (Page 13)

V-Track™ Automatic Long Range Vehicle ID System
Installation Guide
Page 13 of 20 P/N: 01538-001 Rev. G
7.2 Single-Lane Exciter Connection
This wiring connection applies to systems in Single-Lane applications.
Figure 12: Single-Lane Exciter Connection
NOTE: The RS-485 connection to an Exciter is not used
in a single-lane application (the White and Green lines).
EX-10
Exciter
ENTER
Exciter
Antenna
Connection
Power
Supply
+ 12 VDC
Ground
Power Lines
Red / Black
Connect Shield
to Ground
Arming
Device
Brown
Blue
NOTE: Short the Brown and Blue
lines if NO Arming Device is used.