Crestron electronic TPS-GA-TPI - Manual (Page 14)

Isys ® G-Series Touchpanel Interface Crestron TPS-GA-TPI
Connectors, Controls & Indicators (Continued)
# CONNECTORS 1 ,
CONTROLS &
INDICATORS
DESCRIPTION
12 RGBHV INPUT (1 – 2) (2) DB15HD female, RGB (VGA) inputs;
Formats: RGBHV, RGBS and RG
S
B
Input resolution: 640 x 480 minimum to
1600 x 1200 maximum, non-interlaced;
Input levels: 0.5 to 1.5 V
p-p
with built in DC
restoration;
Input impedence: 75 Ω;
Sync input type: autodetect RGBHV, RGBS,
RG
s
B
Sync input level: 3 to 5 V
p-p
;
Sync input impedence: 1 kΩ
Horizontal frequency: 31.5 to 100 kHz
Vertical frequency: 60 to 85 Hz (60 Hz limit at
1600 x 1200)
PIN SIGNAL PIN SIGNAL
1 Red 9 No
Connect
2 Green 10 Ground
3 Blue 11 No
Connect
4 Reserved 12 Monitor
Sense
5 Ground 13 Horizontal
Synch
6 Red
Ground
14 Vertical
Synch
7 Green
Ground
15 Monitor
Sense
Clock
8 Blue
Ground
13 Y, P
B
/Y, P
R
/C/COMP
(1 – 2)
(2) sets of (3) BNC female;
Signal types: Dynamically configurable under
system control as (1) auto-detecting
component (YP
B
P
R
), S-Video (Y/C), or
composite video input
Formats: 480i (NTSC), 576i (PAL), 480p,
576p, 720p and 1080i;
Input levels: 0.5 to 1.5 V
p-p
with built in DC
restoration;
Input impedence: 75 Ω;
Horizontal Frequency: 15 to 45 kHz
Vertical Frequency: 50 to 60 Hz
1. Interface connectors for NET port is provided with the unit.
2. Refer to the Crestron website or contact Crestron for the latest firmware capabilities and device
support.
3. Connect to external touchscreen via part number 4501251 (supplied) or CNSP-602, CNSP-616,
CNSP-617, CNSP-621 or CNSP-622 (available separately).
10 • Isys ® G-Series Touchpanel Interface: TPS-GA-TPI Operations Guide – DOC. 6609A