beautypg.com

Juniper Systems GNSS-RTK-628 User Manual

Page 8

background image

8

628 GNSS RTK Expansion Pack

card is inserted into the connector and not into the

space above or below the connector.

3. Replace the rubber cover. Run a finger around the

outside edge to make sure the gasket is flush with the

case.

cAUTiON:

If the rubber cover is not replaced the unit

is no longer sealed and the warranty is void.

Attaching the Expansion Pack to the Handheld

Follow these instructions to attach the RTK GPS

Expansion Pack to the handheld:
1. Power off the handheld by holding down the power

button for a few seconds and selecting Power Off

from the Power Button menu.

2. Loosen the top four

screws on the back

of the handheld as

shown.

3. Remove the cover

and screws from

the handheld. (The

cover is not used

with the pack.

Place the cover and

screws someplace where you can find them in the

future.)

!