beautypg.com

Juniper Systems GNSS-RTK-628 User Manual

Page 11

background image

628 GNSS RTK Expansion Pack

11

4. The settings on the next screen are unique to every

wireless provider and are required for the modem to

connect to the internet. Configure the APN (Access

Point Name), username, and password.

Depending on your wireless provider, there may only

be one selection. Select one of the choices presented

on this screen and tap on the Configure button at the

bottom of the screen. The handheld performs a reset

to configure the modem with these settings.

Wireless providers occasionally change these

settings. You may need to configure the modem with

one of these settings and then test the configuration

by using Internet Explorer to see if you can connect

to the internet and locate a website. If it does not

connect as expected, then you may need to run

Cell Modem Setup again, choose one of the other

selections on the list, and repeat the test.