Connections – Philips DAT850 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
• Do not switch the power on until aii connections are completed.
• Insert the plugs firmly: poor contact can cause noise.
When RCA pin-plug cords are employed, always connect the
white plug to the left channel terminal. This helps avoid
reversed connections.
1. Connection to stereo components
(Analog signal lines)
DAT deck
• When the stereo amplifier is not provided with DAT terminals,
refer to its instruction manual.
2. Remote cable connection for REMOTE
CONT.
• By connecting a remote cable, REMOTE CONT. functions
(synchro recording) can be performed.
' When making synchro recordings with a CD player, connect
the remote cable to the REMOTE CONT. jacks.
Connect the REMOTE CONT. jack of the deck to the REMOTE
CONT. jack of the amplifier using the remote cable provided.
Note:
When installing this unit, leave an appropriate distance between
it and your stereo amplifier, tuner and television set. If they are
too close, noise (induced hum) may occur.
We recommend that you use outdoor FM and TV antennas.