Philips AZ100217 - Manual

CASSEHE RECORDER
CASSEnE PLAYBACK
1. Set the source selector to TAPE/POWER OFF.
- The POWER indicator lights up.
2 . Press STOP* OPEN ■ A to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY ◄ and playback will start.
5. Adjust the sound using the VOLUME, and DBB controls.
6. For brief interruptions, press PAUSE ll. Press PAUSE
II
again to
resume playback.
7. By pressing or fast winding of the tape is possible in both
directions.
8. To stop playback, press STOP*OPEN ■ A.
- The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/POWER OFF position (with the
cassette keys released) to switch off the set.
- The POWER indicator goes out.
CASSETTE RECORDING
General information on cassette recording
- Recording is permissible insofar as copyright or other rights of third
parties are not infringed.
- This deck is not suited for recording on CHROME (lEC n) or METAL
(lEC TV) type cassettes. For recording you should use NORMAL type
cassettes (lEC I) on which the tabs have not been broken.
- Check and tighten slack tape before use with a pencil, to avoid
jamming the deck mechanism
- The recording level is set automatically. Altering the VOLUME or DBB
controls will not affect the recording in progress.
- No recording will take place during the first 7 seconds, when the
leader tape passes the recorder heads.
- To prevent the accidental erasure of a recording, keep the cassette
side to be safeguarded in front of you and break out the left tab.
Recording on this side is no longer possible.