Remember, Hookups (cont*d) 9 – Philips DVP620VR/17 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H9620UD_1_47,qx4 04.4.7
11:57 AM Page 9
Hookups (cont*d) 9
DVDA^CR to Cable Box or Satellite Receiver and TV
Using only bask RF coaxial cables
This connection will let you use the features of both the VCR and the DVD Player.
Connect a Cable TV or Satellite signal to the IN
jack on the Cable Box/Satellite Receiver.
Use an RF coaxial cable (as the one supplied) to
connect the OUT jack on the Cable Bo^Satellite
Receiver to the ANTIN (Antenna In) jack on the
DVD/VCR.
Use a second RF coaxial cable to connect the ANT-
OUT (Antenna Out) jack on the DVD/VCR to the
^ TV’s Antenna In jack.
Remember...
There are two ways to connect your Cable Box/Satellite Receiver
to the DVD/VCR.With the connection on this page:
# Select TV channels at the Cable Box/Satellite Receiver, not the
DVD/VCR.To record or view TV channels, follow these steps:
1) Press VCR to put the DVD/VCR in VCR mode.TheVCR light
will appear on the front of the DVD/VCR.
2) Press SKIPM/CH or SKIP M/CH ▼ to set the DVD/VCR
to the Cable Box/Satellite Receiver output channel (03 or 04).
3) Set the TV to the DVD/VCR’s output channel (03 or 04).The
DVD/VCR’s output channel is channel 3 when the DVD/VCR is
new.To change it from 3 to 4, press and hold the (VCR) PLAY
► button on the DVD/VCR for 3-5 seconds during tape play
back. For more details, see step 4 on page 8.
4) Select the channel you want to view/record at the Cable
Box/Satellite Receiver.
# You may not view a channel other than the one you are recording.
# You can only program a timer recording for one channel at a time.
Set your Cable Box/Satellite Receiver to the channel you want to
record. When you enter the channel you want to record in a
timer recording, select channel 03 or 04 (the Cable Box/Satellite
Receiver output channel). (This is step 8 on page 37.) Leave the
Cable Box/Satellite Receiver on for a timer recording.
Helpful Hint
If your Cable Box or Satellite
Receiver has Audio and Video Out
jacks, use audio and video cables
to connect them to the VCR
AUDIO IN and VIDEO IN jacks on
the rear of the DVDIVCR.You will
not need the RF coaxial cable con
nection between the Cable
Box/Satellite Receiver and the
DVD/VCR as described at step 2.