Taulti-channel television sound 45, Understanding displays, Multi-channel television sound -46 – Philips DVP620VR/17 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H9620UD_1_47,qx4 04.4.7
11:57 AM Page 45
tAulti-Channel Television Sound 45
Your DVD/VCR can play tapes recorded in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound
from the left and right audio channels.Your DVD/VCR also can play tapes recorded in a second audio (usu
ally, that means your program is recorded in a second language). Of course, your DVD/VCR will play tapes
recorded in monaural (single-source) sound as well.
Your DVD/VCR also will record on a video cassette in Hi-Fi stereo or in second audio, so when you play
that tape on the DVD/VCR, it will be in stereo or second audio.
Read the directions on this page to familiarize yourself with the stereo and second audio setups.Then fol
low the directions on page 46 to record in stereo or second audio, or follow the directions on page 47 to
play tapes recorded in Hi-Fi stereo.
Understanding Displays
When you watch TV channels through the DVD/VCR, portions of the display shown below will appear
when you press DISPLAY twice.
STOP
5:40 PM
CH 02
STEREO
SAP
SLP
~lf SAP or STEREO appears, the program is available in second audio or stereo.
Even though a program is available in second audio or stereo, you must pro
gram the DVD/VCR to receive or record the program. Follow the directions on
page 46.
This display is not available during tape playback.
To play programs in stereo, connect the DVD/VCR to a Stereo or TV as described on pages 11 and 14. You
will use the red and white AUDIO OUT jacks on the DVD/VCR.