Philips DVP620VR/17 - Manual (Page 36)

H9620UD_1_47,qx4 04.4.7 11:57 AM Page 36
36 Timer Recording
Follow the steps below to program the VCR of the DVD/VCR to
record TV programs while you’re away from home. Before you
begin:
• Set up the TV channels at the DVD/VCR. Details are on page 26.
• Set the clock. Details are on pages 28-29.
• Put a tape in the cassette compartment of the DVD/VCR. Make
sure the tape’s record tab is intact and the tape is long enough
to record the program(s).
• Press VCR so the'^CR light appears on the front of the
DVD/VCR.
4 Press DISCA/CR/MENU so MENU appears.
Press A. or ▼ to select TIMER PROGRAMMING.Then,
press ►. Program numbers that do not have a timer recording
stored will flash.
TIMER PROGRAMMING
^'12345^7^': PROG.
DATE
START TIME
ENDTIME
CHANNEL
REC SPEED
Press ^ or ▼ to select an empty program.Then,
press ►.
PROGRAM NUMBER
date - -/ -
STARTTIME
END TIME
CHANNEL
REC SPEED --
Press or ▼ to select ONCE, DAILY, or WEEKLY.
Then, press ►.
• ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
• DAILY - The VCR will record aTV program at the same time
on the same channel every day, Monday through Friday.
• WEEKLY - The VCR will record aTV program at the same
time on the same channel every week, for example, every
Monday.
PROGRAM NUMBER 1
► ONCE
DAILY
WEEKLY
Helpful Hints
You cannot access the TIMER PRO­
GRAMMING menu at step 2 if
the clock is not set The CLOCK
SET menu will appear. Follow the
steps on pages 28-29 to set the
clock.
Only programs that will air Monday-
Friday can be recorded on a DAILY
basis. If you select DAILY at step 4,
then enter a Saturday or Sunday
DATE at step 5, the correct program
will not be recorded.The VCR will
alter the recording date and record
a different program than the one
you intended.