18 video cassette playback, Press stop ■ to stop playback, Press ◄◄ to rewind the tape – Philips DVP620VR/17 User Manual
Page 18: Ce>"^gd, Video cassette playback, О о о, О о о о, Helpful hints
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H9620UD_1_47,qx4 04.4.7
11:57 AM Page 18
18 Video Cassette Playback
Read and follow the steps below to play a tape.
^ Turn on the TV. Set it to channel 3 or 4 or its
■ AUDIO/VIDEO IN channel. This depends on how you
^ connected the DVD/VCR to a TV.
Details are on pages 7-15.
With the DVD/VCR power off, insert a tape in the
cassette compartment of the DVD/VCR. The VCR
light will appear on the front of the DVD/VCR. If the tape’s
record tab has been removed, play will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary. The VCR light will
appear on the front of the DVD/VCR.
If playback does not start automatically, press VCR,
then press PLAY ►.
Press STOP ■ to stop playback.
i Turn on the TV.
% Insert a tape in the
# DVD/VCR.
О О О
REPEAT
REPEAT AUDD
Q
0
Q
0Ж
SUBTITLE
ZOOM
ANGLE
SKIP/CH
RETURN TITLE CLEAR/RESET SLOW
'V'-^VCR^ ^CR/T^ ^DVD^
0
Press ◄◄ to rewind the tape.
After the tape stops, press STOP/EJECT on the
front of the DVD/VCR to remove the tape.
rwn* s гмиос
CE>"^GD
TIMER SET MARKER RECORD
О О ®
SPEED
О О © ©
© © © ©
0
0
0
0
PHILIPS
Press STOP/EJECT
I
on the DVD/VCR.
Helpful Hints
Other tape playback features are
on pages 40-47.
If AUTO REPEAT is ON, playback will
begin when you insert a tape, even
when the record tab is intact Details
are on page 40.
You must connect the DVD/VCR to
a TV using the RF coaxial cable or
the audio/video cables in order to
use the VCR features.These hookups
are explained on pages eight and
11
.