Philips DVP620VR/17 - Manual (Page 65)

H9620UD_48_80,qx4 04.4.7 11:58 AM Page 65
Display (cont*d) 65
' If you selected ANGLE ICON, press OK repeatedly
to turn it ON or OFF.The default setting is ON. Choose
ON to see the Angle icon when multiple camera angles
are available during DVD playback. Details are on page 55.
Choose OFF to disable the Angle icon.
■ If you selected AUTO POWER OFF, press OK
repeatedly to turn it ON or OFF.The default setting is
ON. Choose ON if you want the DVD/VCR to switch to
VCR mode automatically if there is no activity at the
DVD Player for 35 minutes.
i If you chose PROGRESSIVE, press OK repeatedly
to turn PROGRESSIVE ON or OFF.The default setting is
OFF. Choose ON if your TV has Progressive Scan and if
the TV is connected to the Player’s COMPONENT
VIDEO OUT jacks. Choose OFF otherwise.
■ B B ■ □ ■ HUB
✓ •niSPlAV S.
TVASPECT «LETTERBOX
STILL MODE AUTO
lANGI FICON ON
AUTOPOWEROFF ON
PROGRESSIVE OFF
TV ASPECT STILL MODE ANGLE ICON
a
PR
a) (E
■ HUB
TVASPECT «LETTERBOX
STILL MODE AUTO
ANGI FICON ON
U iitopowfroff I on
PROGRESSIVE OFF
TVASPECT 43LETTERB0X
STILL MODE
AUTO
ANGLE ICON ON
AUTO POWER OFF PROGRESSIVE
Press SYSTEM/MENU to remove the menus.
If PROGRESSIVE is ON, this message appears:
iiBfW^TVhas pio^^WBlWK«
Press ▲ or ▼ to make a selection, then press OK. If
you select NO, the menu disappears and PROGRESSIVE is
OFF. If you select YES, this appears:
le good,SstoBt'YES'.
Confirm your setting, then press OK. The menu will
disappear and PROGRESSIVE will be ON.
If you do not press any buttons for 15 seconds, the
Progressive Scan will switch to OFF.
Helpful Hints
You can set PROGRESSIVE to OFF
either in the DISPLAY menu or by
pressing and holding the PLAY ►
(DVD) button on the front of the
DVD/VCR for more than five
seconds.