Rerecording (tape duplication) 35, Make the connections shown above, Press speed to select sp or slp at dvd/vcr 2 – Philips DVP620VR/17 User Manual
Page 35: Rerecording (tape duplication)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H9620UD_1_47,qx4 04.4.7
11:57 AM Page 35
Rerecording (Tape Duplication) 35
These instructions show you how to copy videotapes.The illustration uses two DVD/VCRs. Other VCRs or
Camcorders may operate differently.
1. Audio cables from AUDIO OUT jacks (red and white)
of DVD/VCR 1 to AUDIO IN jacks of DVD/VCR 2
to the TV’s ANTENNA IN jack
Make the connections shown above.
DVD/VCR 1 will play your tape. Put a prerecorded tape
into the cassette compartment of DVD/VCR 1.
Press VCR to put the unit in VCR mode if necessary.
DVD/VCR 2 will record your tape. Insert a blank tape in
the cassette compartment of DVD/VCR 2. Press VCR
to put the unit in VCR mode if necessary.
Turn on the TV and set it to channel 03 or 04 (the
RF output channel of DVD/VCR 2).To determine the
DVD/VCR’s output channel, see step 4 on page eight.
Point the remote control at DVD/VCR 2. Press
Number buttons 0,0,1 or 0,0,2. (See Helpful Hints to
the right.)
Press SPEED to select SP or SLP at DVD/VCR 2.
Press PLAY ► (VCR) on the front of DVD/VCR 1
and RECORD • on the front of DVD/VCR 2 at the
same time.
To stop recording, press STOP/EJECT (VCR) on
DVD/VCR 1,then press STOP/EJECT (VCR) on
DVD/VCR 2.
Helpful Hints
If you use the AUDIO and VIDEO
IN jacks on the back of DVD/VCR
2, press Number buttons 0,0, 1 at
step 5. LI will appear on the TV
screen.
If you use the AUDIO and VIDEO In
jacks on the front of DVD/VCR 2,
press Number buttons 0,0,2 at
step 5. L2 will appear on the TV
screen.
Unauthorized recording of copy
righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.
If a program has copyright protec
tion, it may not be recorded clearly.