Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual User Manual

Page 25

1BChapter 2: Camera operation

TruVision IP Camera Configuration Manual

You can define the area on screen where the motion is detected, the level of
sensitivity to motion, the schedule when the camera is sensitive to detecting
motion as well as which methods are used to alert you to a motion detection
alarm.

Figure 11: Motion detection menu

Defining a motion detection alarm requires the following tasks:

1. Area Settings: Define the on-screen area that can trigger a motion detection

alarm and the detection sensitivity level.

2. Arming Schedule: Define the schedule during which the system detects

motion.

3. Recording schedule: Define the schedule during which motion detection can

be recorded. See “Defining a recording schedule” on page 29 for further
information.

4. Linkage: Specify the method of response to the alarm.

To set up motion detection:

1. In the

Events

folder, click the

Motion Detection

subfolder to open its

window.

2. Check the

Enable Motion Detection

box.

Note:

Deselect the “Enable Motion Detection” option to disable the motion

detection alarm.

3. Click

Draw Area

.Click and drag the mouse on the live video image to draw an

area sensitive to motion detection.

Note:

You can draw up to 8 motion detection areas on the same image.