Interlogix TruVision IP Open Standards Outdoor Cameras Configuration Manual User Manual
Page 22

1BChapter 2: Camera operation
20
TruVision IP Camera Configuration Manual
Figure 8: OSD settings menu
To position the date/time and name on screen:
1. In the
Image
folder, click the
OSD Settings
subfolder to open its window.
2. Check the
Display
Name
box to display the camera’s name on screen. You
can modify the default name in the text box of
Camera Name
.
3. Check the
Display Date
box to display the date/time on screen.
4. Check the
Display Week
box to include the day of the week in the on-screen
display.
5. Select the time format from the
Time format
list box. Formats include: 24-
hour and 12-hour.
6. Select the date format from the
Date format
list box. Formats include:
• YYYY-MM-DD
• MM-DD-YYYY (Default)
• DD-MM-YYYY
7. Select a display mode for the camera from the
Display Mode
list box. Display
modes include:
•
Transparent & Not flashing
. The image appears through the text.
• Transparent & Flashing. The image appears through the text. The text
flashes on and off.
•
Not transparent & Not flashing
. The image is behind the text. This is
default.
•
Not transparent & Flashing
. The image is behind the text. The text
flashes on and off.